Skip to main content

Electrical cabinet Enclosure Production Line video





Electrical box enclosure production line for making electric enclosure box which can be using in outdoor indoor power distribution board forming and bending.
Labels:

Comments

Post a Comment

Popular posts from this blog

Electrical Cabinet & Distribution Box Classification

There are two types of commonly used distribution boxes, wooden and metal.  Because metal distribution boxes have a higher protection level, they are more often used in metal. Classified according to structural characteristics and uses: (1) fixed panel switchgear, often called switchboard or power distribution screen. It is an open-type switchgear with a panel cover. It has a protective effect on the front. It can still touch live parts on the back and sides. The protection level is low. Substation is used for centralized power supply. (2) Protective (ie closed) switchgear refers to a low-voltage switchgear that is closed on all sides except the installation surface. The electrical components such as the switch, protection, monitoring and control of this cabinet are installed in a closed enclosure made of steel or insulation material, and can be installed on or off the wall. There can be no isolation measures between each circuit in the cabinet, and a grounded metal plate or...
1 comment
Read more

Do You Belive It & This Mini Handrail Tube Made By Roll Forming Machine

Mini Handrail Tube & Minimal Steel tube Production machine https://www.superdamc.com
3 comments
Read more

Steel Enclosure Electronic Cabinet Making Machine

Steel enclosure roll forming machine production line Roll forming machine for production electronic cabinet, including distribution panel forming machine, panel box bending. Product Description Ⅰ, Metal Forming machine for distribution steel enclosure panel 1,Technical parameters (Item:YX20-150/200/250/300/350) No. ITEM PARAMETER REMARK 1 MATERIAL Type Cold-rolled strip steel, galvanized sheet T.(mm) 0.8-1.2mm Yield Strength (Mpa) Q235 2 Forming product   Width 150,200,250,300,350mm 3 Forming speed   (m/min) 2-8m Including hole 4 Forming main power   (KW) 7.5 KW FYR 5 Hydraulic power   (KW) 18.5 KW FYR 6 Bending power (KW) 3 KW FYR 7 Voltage  AC380V ，50Hz，3P Ⅱ, Distribution box production line process (A) 2 in 1 Uncoiler Straightening→servo feeder→Hydraulic press breach device  → Guide device → roll forming machine → hydraulic punch →shear device (including knife)→ finished product rack (B) Bending machine with to...
6 comments
Read more